Key Functions:

• Temperature and humidity monitoring: The Sens’it periodically sends both ambient temperature and humidity measurements.
• Light monitoring: The Sens’it periodically sends ambient brightness.
• Magnet detection: The Sens’it sends data every time a magnet is detected close to – or removed from – its side.
• Door-opening detection: Once the Sens’it is affixed to a door – or drawer – it sends data every time the door is opened or closed.
• Vibration detection: The Sens’it sends data every time the accelerometer detects a motion.

Switching modes is as simple as pressing a button.  Sens’it Discovery comes with a fully-featured application for both your browser and your phone & allows you to:

• See real-time feeds of your data.
• Configure your Sens’it directly from the app.
• Be alerted by email, SMS, and push notifications.
• Manage multiple Sens’its in one place.
• Check your Sigfox coverage.
• And much more!

Use Cases:

1. Temperature and humidity monitoring

2. Light monitoring

3. Door Opening detection

4. Vibration detection

5.Magnet detection

Temperature and Humidity monitoring :

You can affix your Sens’it on a wall and turn it into the Temperature and Humidity mode (green light). This is a periodic mode: measurements are sent every hour. You can create a notification for this mode: You can receive an alert on your phone if the temperature is above 30°C for example.

If you propel into a real business case, it is used in facility management. Air condition really impacts the productivity and the well-being of people.

It can be key in a company or a shopping center. There are solutions connected with Sigfox on the market. You can detect Air Conditioning or Heater issues and even create a wall solution managing them depending on the sensor results. This can really reduce spendings.

Door opening detection :

You can affix your Sens’it to a door or a mailbox and turn it into the Door Opening Detection mode (clear blue light). The is a trigger mode. With the accelerometer and the magnetometer, you can detect if a door has been opened or not. The message is triggered if the event happens. You can create a notification for this mode. You will receive a text message on your phone if the door is opened.

If you propel into a real business case. You can know the frequency usage of an area. You can detect when a pest (rat) enters a trap, when a secure area has been breached, or that an area is very used and thus optimize the cleaning process. In any time, you save money because you do not need a periodic human check anymore. You optimize based on field information.

Asset tracking and geolocation:

You can put your Sens’it in a luggage or parcel. You can turn it on the geolocation mode (yellow light). It sends the luminosity value periodically. Utilizing our Atlas Native service you can receive geolocation points in your end platform and know when the luggage is open.

Specifications:

• LEDs
• Quantity: 3 (White, Red, RGB)
• Port
• Type: Micro-USB
• Control
• Interface: Central button
• Mechanical and Environmental
• Product Dimensions: 52 x 82 x 15 mm (2 x 3.2 x 0.6 in)
• Product Weight: 50 g (1.8 oz)
• Operating Temperature: -10°C to 50°C
• Charging Temperature: 0°C to 40°C
• Operating Relative Humidity: 30% to 90%
• Protection Rating: IP54
• RoHS Compliance: RoHS 3
• Sensors
• Thermometer (HTS221)
• Humidity Sensor (HTS221)
• Accelerometer (FXOS8700)
• Magnetometer (FXOS8700)
• Light Sensor (LTR329)
• Reed Switch